Globe Valve with linear actuator:
Classic globe valve with equal-percentage characteristic for controlling low to high flow rates. Available as a 2-way Valve or mixing valve with either flanged ends or external thread. Also suitable for Open/Close duty. Actuators with an emergency control function can be supplied.
General information - Globe Valves:
Throttling Valves and Mixing Valves
Belimo globe valves have been designed for a long service life in closed-loop circuits carrying cold, warm or hot water (due to its Stainless Steel Valve Seat/Valve Cone, the H6. S is suitable for duty in hot water circuits and steam applications). The capacity range from 1 kW to 3 MW is completely covered by DN 15 to DN 150.
The closing point of the globe valves in the Belimo H4..B, H5..B, H6..N and H7..N series is in the UP position. The valve stem is fully extended from the Valve Fitting. The flow rate through the control path is 0% (bypass path with 3-way valve: 100%). In the schematic diagram, the valve cone is pointing upwards and is shaped like a Δ.
The closing point of the globe valves in the Belimo H6..S series is in the down position. The stem is fully retracted into the Valve Fitting. The flow rate through the control path is 0%. In the schematic diagram, the valve cone is pointing downwards and is shaped like a ∇.